4155 N. 1000E (Wally Parks Dr.)
Adjacent To O'Reilly Raceway Park
Brownsburg, IN 46112
8:00 - 5:00 M-F, 8:00 - 12:00 Sat. - EST
 

Home About MPH Products Tech. Info. Contact Sale Terms
 
AN - NAS - MS
Hardware
 

 

   

Time-Sert Threaded Inserts

 

- TIME-SERTŪ is a solid bushing insert. This guarantees easy installation and allows for full load use of tapped hole, ensuring protection against stress and vibration.

 

- TIME-SERTŪ is thin walled due to synchronized internal external threads. Thin cross sectional area allows for installation in areas of limited space and clearance material.

 

- TIME-SERTŪ Positive Placement. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.

 

- TIME-SERTŪ is self locking. On installation the bottom internal threads of the insert are cold rolled to expand the mating external threads into the base material locking the insert in place. Locking mechanism is at the bottom of insert.


 

Installation Video

 
Standard Inserts   Heavy Wall Inserts
  Time-Sert FAQs  
 

Standard Inserts

Insert Lengths

Engineering Data

THREAD SIZE

LENGTH
(INCHES)

4 - 40

.200

6 - 32

.250

8 - 32

.250
.320

10 - 24

.240
.300
.370

10 - 32

.240
.300
.370

12 - 24

.300
.370
.472

1/4 - 20

.280
.380
.500

1/4 - 28

.280
.380
.500

5/16 - 18

.350
.450
.620
.750

5/16 - 24

.350
.450
.620
.750

3/8 - 16

.312
.400
.520
.620
.750
.900
1.000
1.200

3/8 - 24

.300
.350
.520
.750

7/16 - 14

.400
.600
.870
1.000
1.250
1.500

7/16 - 20

.250
.480
.600
.870
1.370

1/2 - 13

.400
.650
1.000
1.250
1.500

1/2 - 20

.400
.500
.650
1.000
1.370

9/16 - 12

.750
1.120

9/16 - 18

.350
.450
.750
1.120

5/8 - 11

.500
.850
1.250

5/8 - 18

.320
.450
.850
1.250

3/4 - 10

.750
1.100
1.500

3/4 - 16

.650
1.100
1.500

INSERT
SIZE

DRILL

C.BORE

TAP

DRILL
SIZE

MIN.
DIA

MIN.
DEPTH

MAJOR
DIA.

4-40
#31
.120
.170
.055
.147
6-32
#26
.147
.218
.070
.182
8-32
#17
.173
.241
.065
.208
10-24
13/64
.203
.288
.075
.247
10-32
13/64
.203
.274
.075
.234
12-24
#1
.228
.307
.075
.265
1/4-20
17/64
.265
.352
.075
.319
1/4-28
G
.261
.340
.075
.300
5/16-18
21/64
.328
.430
.085
.388
5/16-24
P
.323
.410
.080
.368
3/8-16
X
.397
.495
.085
.460
3/8-24
W
.386
.473
.080
.432
7/16-14
29/64
.453
.571
.110
.534
7/16-20
29/64
.453
.547
.085
.506
1/2-13
33/64
.515
.648
.110
.604
1/2-20
33/64
.515
.610
.085
.569
9/16-12
19/32
.593
.711
.130
.675
9/16-18
37/64
.578
.668
.110
.638
5/8-11
21/32
.656
.787
.135
.748
5/8-18
41/64
.640
.740
.110
.701
3/4-10
25/32
.781
.953
.135
.885
3/4-16
49/64
.765
.870
.110
.835

 


 
Heavy Wall Inserts

These kits are used for threads which have been previously repaired.

These kits will repair holes that were repaired by helicoil, perma-coil,
recoil or any other simular coil style insert.

BIG-SERTŪ is a heavy wall solid bushing, easy to install with positive placement.

BIG-SERTŪ gives increased load protection for critical use.

BIG-SERTŪ will repair oversize holes which have previously been repaired.


NOTE: Bottom few internal threads are incomplete.

The insert driver (Roll form tap) seats the insert and completes the bottom threads.
This pushes the pin out to contact the threaded hole. Back out of the insert is prevented by the cam lock effect of the pin.


Insert Lengths

Engineering Data

THREAD SIZE

LENGTH
(inches)
1/4-20
.380
.500
1/4-28
.380
.500
5/16-18
.450
.620
5/16-24
.450
.620
3/8-16
.400
.520

.750
1.000
3/8-24
.520
.750
7/16-14
.600
.870
1.000
1.250
7/16-20
.600
.870
1/2-13
.650
1.000
1/2-20
.650
1.000

INSERT
SIZE

DRILL

C.BORE

TAP

DRILL
SIZE

MIN.
DIA

MIN.
DEPTH

MAJOR
DIA.

1/4-20
7.8mm
.307
.355
.050
.359
1/4-28
L
.290
.330
.055
.330
5/16-18
13/32
.406
.474
.085
.474
5/16-24
13/32
.406
.474
.085
.474
3/8-16
31/64
.484
.552
.085
.552
3/8-24
31/64
.484
.552
.085
.552
7/16-14
37/64
.578
.634
.085
.634
7/16-20
37/64
.578
.634
.085
.634
1/2-13
41/64
.640
.701
.085
.701
1/2-20
41/64
.640
.701
.085
.701

TIME-SERT

Custom Hoses

Brake, clutch and other hi-pressure applications
(steel braided, crimp on ends - straight, 45,
90, banjo)
Many colors available

Stop By The Store


 

 


copyright 2007 Midwest Performance Hardware
MPH, Midwest Performance Hardware, XRP, Aeroquip, Autosol, racing parts, aircraft hardware, Aircraft bolts, Jet nuts, performance pluming, ARP, Prolong, racing hardware, aerospace hardware, Holley parts, Moroso, Competition Engineering, Holochrome, Copaslip, racing supplies, hot rod parts, Jeg's, Summit, Moroso, racing, hose, hose ends, rod bolts, racing bolts, drag racing parts, chassis parts, Dzus, Tyraps, Thomas and Betts, SMC, air hose, fittings, Purosil, anderson plugs, adapters, high performance, brake hoses, brake lines, top fuel, funny car, pro stock, super comp., super comp, pro gas, pro mod, pro mod., engine parts, racing engine parts, NAS bolts, AN bolts, MS bolts, washers, nuts, AN washers, hutchins, hutchens device